You are here: Home > TEST JLG Landing > JLG Tech Tips > Tools > Handheld Analyzers
We found 0 results matching your criteria.
Danger

Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.

Do Not Perform Maintenance Unless:

  1. You are trained and qualified to perform maintenance on this machine.
  2. You read, understand and obey:
    1. manufacturer’s instructions and safety rules
    2. employer’s safety rules and worksite regulations applicable governmental regulations
  3. You have the appropriate tools, lifting equipment and a suitable workshop.

Handheld Analyzers

JLG has made two different shaped analyzers over the years—square and T-shaped. Our handheld analyzers 2901443 are used for diagnostic programming and troubleshooting on aerial work platforms. Both will perform the same functions and work on all machines that accept an analyzer. These should not be confused with the “calibrator” that is used on Sevcon motor controllers, as that is totally different and not compatible.

JLG Analyzer P/N 2901443