|
JLG, SkyTrak, Lull and Gradall telehandler tires are genuine OEM tires authorized by JLG. Perfect fitment for these tires provides aerial and telehander tires stability and performance. A full line of casters, non marking tires, pneumatic tires, and foam filled tire assemblies.
|
|
|
Casters
|
|
Non Marking Tire/Wheel Assemblies
|
|
|
|
|
|
|
|
JLG Casters are typically found on push around vertical lifts such as the AM product series, lift pods and other light weight AWPs.
|
|
|
|
|
|
Genuine JLG non marking tire and wheel assemblies are designed for indoor use. Typically, these non marking tires will include the rim and tire as one complete assembly. These soft compounds prevent marking up the flooring inside a building.
|
|
|
|
|
|
A common question heard in the call center is, “When should a damaged tire be replaced?” The following is a guideline that will help you make that decision.
Pneumatic tires: If there are any cuts, rips or tears that expose sidewall or tread area cords in the tire, remove the tire from service immediately. Arrangements must be made for replacement of the tire or tire assembly.
Polyurethane foam-filled tires: Remove the tire from service immediately and make arrangements for replacement of the tire or tire assembly when any of the following conditions are discovered:
- A smooth, even cut through the cord plies which exceeds 3 inches (7.5 cm) in total length
- Any tears or rips (ragged edges) in the cord plies which exceed 1 inch (2.5 cm) in any direction
- Any punctures which exceed 1 inch in diameter
- Any damage to the bead area cords of the tire
If a tire is damaged but is within the above noted criteria, the tire must be inspected on a daily basis to ensure the damage has not propagated beyond the allowable criteria.
|
|
|
