| |
 |
 |
 |
|
Skyjack 3220 lift cylinder repack kit |
Tuesday, June 9, 2026 |
| Reviewer:
Ron Gerdes from Parker, AZ United States
|
|
Nice complete seal kit with all variants of the 3.5" lift cylinder. If you have the 3" cylinder, this is not your kit. Measure your hydraulic ram.. the shiny part.. this is the 3.5. great kit! Good luck doing yours!
If you have the lift resting on the safety stand, there's not enough room unless you assemble the gland nut into the ram while it is in the cylinder.. if you lift it up and make more room and brace it, you can put the gland nut on the ram and then place the ram into the machine. Make sure it is braced safely!
Was this review helpful to you? 
|
|
 |
|
 |
|
