You are here: Home > TEST JLG Landing > JLG Tech Tips > Machine Error Codes > ADE Boom Lifts: Running at Cutback Out of Transport
We found 0 results matching your criteria.

Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.

Do Not Perform Maintenance Unless:

  1. You are trained and qualified to perform maintenance on this machine.
  2. You read, understand and obey:
    1. manufacturer’s instructions and safety rules
    2. employer’s safety rules and worksite regulations applicable governmental regulations
  3. You have the appropriate tools, lifting equipment and a suitable workshop.

ADE Boom Lifts: Running at Cutback Out of Transport

Models Affected : JLG® Boom Lifts 800S-1500SJP

If your machine gives you the code “Running at cutback out of transport,” this indicates that the lift is elevated above horizontal (or telescoped out on 800S-1500SJP) and the drive speed is cutback, not that something is wrong with your equipment. This code is activated by limit switches and sensors, so if the machine has this reading when it is fully telescoped-in and boomed-down, a limit switch may be stuck

Watch this short video to learn more about the Transport Position Sensing System for model 1500SJ.